[USRP X300] IPアドレス変更

展開先のbuild/utils/usrp_burn_mb_eepromでEEPROMを書き換える

If the address is wrong, you can reprogram the IP address of the USRP X300/X310: cd <install-path>/lib/uhd/utils ; ./usrp_burn_mb_eeprom –args=addr=<current IP address> –values=”ip-addr0=<new ip address>”

 

usr@dir:~/uhd-3.9.5/build/utils$ ./usrp_burn_mb_eeprom –args=addr=192.168.10.2 –values=”ip-addr0=192.168.0.189″
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.009.005-0-unknown

Creating USRP device from address: addr=192.168.10.2
— X300 initialization sequence…
— Determining maximum frame size… 1472 bytes.
— Setup basic communication…
— Loading values from EEPROM…
— Setup RF frontend clocking…
— Radio 1x clock:200
— Detecting internal GPSDO…. Found an internal GPSDO
— Initialize Radio0 control…
— Performing register loopback test… pass
— Initialize Radio1 control…
— Performing register loopback test… pass

Fetching current settings from EEPROM…
EEPROM [“ip-addr0”] is “192.168.10.2”

Setting EEPROM [“ip-addr0”] to “192.168.0.189”…
Power-cycle the USRP device for the changes to take effect.

Done